此为 Mathematica 4 文档,内容基于更早版本的 Wolfram 语言
查看最新文档(版本11.1)

AxesEdge \\

Usage

AxesEdge是三维图形函数的一个可选项,用来指定坐标轴应被画在有界盒框的哪些边上.


Notes

AxesEdge->   ,   ,   ,   ,   ,    specifies on which three edges of the bounding box axes are drawn. The  must be either +1 or -1, and specify whether axes are drawn on the edge of the box with a larger or smaller value of coordinate i, respectively. AxesEdge->   ,   ,   ,   ,   ,    指定坐标轴将被画在有界盒框的哪三条边上.必须为+1 或 -1,用来分别指定是否坐标轴使用一个较大或较小的坐标值被画在盒框的边缘上.
• The default setting AxesEdge->Automatic chooses automatically on which exposed box edges axes should be drawn. 缺省设置AxesEdge->Automatic自动选择坐标轴应被画在盒框的哪条曝露的边上.
• Any pair   ,   in the setting for AxesEdge can be replaced by Automatic to specify that the position of the corresponding axis is to be chosen automatically. AxesEdge 设置中的任何一对  ,   都可以使用 Automatic 代替,用来指定相应坐标轴的位置将自动被选取.
• Any pair   ,   can be replaced by None, in which case the corresponding axis will not be drawn. 如果相应的坐标轴不用被画出,则任何一对  ,   都可以使用None代替.
• If you explicitly specify on which edge to draw an axis, the axis will be drawn on that edge, whether or not the edge is exposed with the view point you have chosen. 如果你明确指定将在某条边上画上一个坐标轴,则该坐标轴将被画在那条边上,而不管该边是否与你选取的视点一起被显示. • 参见 Mathematica 全书: 2.9.13节.
Further Examples

Compare the placement of the axes in these two plots.

Evaluate the cells to see the graphics.

In[1]:=  

In[2]:=