Numerical Solution of Differential Equations
The function
NDSolve discussed in
"Numerical Differential Equations" allows you to find numerical solutions to differential equations.
NDSolve handles both single differential equations, and sets of simultaneous differential equations. It can handle a wide range of
ordinary differential equations as well as some
partial differential equations. In a system of ordinary differential equations there can be any number of unknown functions
y_{i}, but all of these functions must depend on a single "independent variable"
x, which is the same for each function. Partial differential equations involve two or more independent variables.
NDSolve can also handle
differentialalgebraic equations that mix differential equations with algebraic ones.
NDSolve[{eqn_{1},eqn_{2},...},y,{x,x_{min},x_{max}}] 
 find a numerical solution for the function y with x in the range x_{min} to x_{max} 
NDSolve[{eqn_{1},eqn_{2},...},{y_{1},y_{2},...},{x,x_{min},x_{max}}] 
 find numerical solutions for several functions y_{i} 
Finding numerical solutions to ordinary differential equations.
NDSolve represents solutions for the functions
y_{i} as
InterpolatingFunction objects. The
InterpolatingFunction objects provide approximations to the
y_{i} over the range of values
x_{min} to
x_{max} for the independent variable
x.
NDSolve finds solutions iteratively. It starts at a particular value of
x, then takes a sequence of steps, trying eventually to cover the whole range
x_{min} to
x_{max}.
In order to get started,
NDSolve has to be given appropriate initial or boundary conditions for the
y_{i} and their derivatives. These conditions specify values for
y_{i}[x], and perhaps derivatives
y_{i}'[x], at particular points
x. In general, at least for ordinary differential equations, the conditions you give can be at any
x:
NDSolve will automatically cover the range
x_{min} to
x_{max}.
This finds a solution for y with x in the range 0 to 2, using an initial condition for y[0].
Out[1]=  

This still finds a solution with x in the range 0 to 2, but now the initial condition is for y[3].
Out[2]=  

Here is a simple boundary value problem.
Out[3]=  

When you use
NDSolve, the initial or boundary conditions you give must be sufficient to determine the solutions for the
y_{i} completely. When you use
DSolve to find symbolic solutions to differential equations, you can get away with specifying fewer initial conditions. The reason is that
DSolve automatically inserts arbitrary constants
C[i] to represent degrees of freedom associated with initial conditions that you have not specified explicitly. Since
NDSolve must give a numerical solution, it cannot represent these kinds of additional degrees of freedom. As a result, you must explicitly give all the initial or boundary conditions that are needed to determine the solution.
In a typical case, if you have differential equations with up to
n^{th} derivatives, then you need to give initial conditions for up to
(n1)^{th} derivatives, or give boundary conditions at
n points.
With a thirdorder equation, you need to give initial conditions for up to second derivatives.
Out[4]=  

This plots the solution obtained.
Out[5]=  

With a thirdorder equation, you can also give boundary conditions at three points.
Out[6]=  

Mathematica allows you to use any appropriate linear combination of function values and derivatives as boundary conditions.
Out[7]=  

In most cases, all the initial conditions you give must involve the same value of
x, say
x_{0}. As a result, you can avoid giving both
x_{min} and
x_{max} explicitly. If you specify your range of
x as
{x, x_{1}}, then
Mathematica will automatically generate a solution over the range
x_{0} to
x_{1}.
This generates a solution over the range 0 to 2.
Out[8]=  

You can give initial conditions as equations of any kind. In some cases, these equations may have multiple solutions. In such cases,
NDSolve will correspondingly generate multiple solutions.
The initial conditions in this case lead to multiple solutions.
Out[9]=  

Here is a plot of all the solutions.
Out[10]=  

You can use
NDSolve to solve systems of coupled differential equations.
This finds a numerical solution to a pair of coupled equations.
Out[11]=  

This plots the solution for y from these equations.
Out[12]=  

This generates a parametric plot using both x and y.
Out[13]=  

Unknown functions in differential equations do not necessarily have to be represented by single symbols. If you have a large number of unknown functions, you will often find it more convenient, for example, to give the functions names like
y[i].
This constructs a set of five coupled differential equations and initial conditions.
Out[14]=  

Here is a plot of the solutions.
Out[16]=  

NDSolve can handle functions whose values are lists or arrays. If you give initial conditions like
y[0]{v_{1}, v_{2}, ..., v_{n}}, then
NDSolve will assume that
y is a function whose values are lists of length
n.
This solves a system of four coupled differential equations.
Out[17]=  

Special options for NDSolve.
NDSolve has many methods for solving equations, but essentially all of them at some level work by taking a sequence of steps in the independent variable
x, and using an adaptive procedure to determine the size of these steps. In general, if the solution appears to be varying rapidly in a particular region, then
NDSolve will reduce the step size or change the method so as to be able to track the solution better.
This solves a differential equation in which the derivative has a discontinuity.
Out[19]=  

NDSolve reduced the step size around x=0 so as to reproduce the kink accurately.
Out[20]=  

Through its adaptive procedure,
NDSolve is able to solve "stiff" differential equations in which there are several components which vary with
x at very different rates.
In these equations, y varies much more rapidly than z.
Out[21]=  

NDSolve follows the general procedure of reducing step size until it tracks solutions accurately. There is a problem, however, when the true solution has a singularity. In this case,
NDSolve might go on reducing the step size forever, and never terminate. To avoid this problem, the option
MaxSteps specifies the maximum number of steps that
NDSolve will ever take in attempting to find a solution. For ordinary differential equations the default setting is
MaxSteps>10000.
There is in fact a singularity in the solution at x=0.
Out[24]=  

The default setting for
MaxSteps should be sufficient for most equations with smooth solutions. When solutions have a complicated structure, however, you may occasionally have to choose larger settings for
MaxSteps. With the setting
MaxSteps>Infinity there is no upper limit on the number of steps used.
To take the solution to the Lorenz equations this far, you need to remove the default bound on MaxSteps.
Out[25]=  

Here is a parametric plot of the solution in three dimensions.
Out[26]=  

When
NDSolve solves a particular set of differential equations, it always tries to choose a step size appropriate for those equations. In some cases, the very first step that
NDSolve makes may be too large, and it may miss an important feature in the solution. To avoid this problem, you can explicitly set the option
StartingStepSize to specify the size to use for the first step.
The equations you give to
NDSolve do not necessarily all have to involve derivatives; they can also just be algebraic. You can use
NDSolve to solve many such
differentialalgebraic equations.
This solves a system of differentialalgebraic equations.
Out[27]=  

NDSolve[{eqn_{1},eqn_{2},...},u,{t,t_{min},t_{max}},{x,x_{min},x_{max}},...] 
 solve a system of partial differential equations for u 
NDSolve[{eqn_{1},eqn_{2},...},{u_{1},u_{2},...},{t,t_{min},t_{max}},{x,x_{min},x_{max}},...] 
 solve a system of partial differential equations for several functions u_{i} 
Finding numerical solutions to partial differential equations.
This finds a numerical solution to the wave equation. The result is a twodimensional interpolating function.
Out[29]=  

This generates a plot of the result.
Out[30]=  

This finds a numerical solution to a nonlinear wave equation.
Out[31]=  

Here is a 3D plot of the result.
Out[32]=  

This is a higherresolution density plot of the solution.
Out[33]=  

Here is a version of the equation in 2+1 dimensions.
Out[34]=  

This generates a list of plots of the solution.
Out[36]=  
