This package contains sensors:
- pSensor: absolute pressure
- TSensor: absolute temperature (Kelvin)
- dpSensor: pressure drop between flowPort_a and flowPort_b
- dTSensor: temperature difference between flowPort_a and flowPort_b
- m_flowSensor: measures mass flow rate
- V_flowSensor: measures volume flow rate
- H_flowSensor: measures enthalpy flow rate
Some of the sensors do not need access to medium properties for measuring,
but it is necessary to define the medium in the connector (check of connections).
Thermodynamic equations are defined in partial models (package Interfaces.Partials).
All sensors are considered massless, they do not change mass flow or enthalpy flow.
- Main Authors:
-
Anton Haumer
Technical Consulting & Electrical Engineering
A-3423 St.Andrae-Woerdern, Austria
email: a.haumer@haumer.at
Dr.Christian Kral
Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H.
arsenal research
Giefinggasse 2
A-1210 Vienna, Austria
Copyright © 1998-2009, Modelica Association, Anton Haumer and arsenal research.
The Modelica package is free software; it can be redistributed and/or modified
under the terms of the Modelica license, see the license conditions
and the accompanying disclaimer
here.
