BUILT-IN WOLFRAM LANGUAGE SYMBOL

ScaleOrigin

ScaleOrigin
is an option for gauge functions that describes how to position the scale on the gauge.

DetailsDetails

  • In gauges with linear axes, ScaleOrigin can take the following values using the default vertical scale orientation for reference:
  • rhorizontal postion of the scale of the scale
    Left,Right,Bottom,Topon which side of the face to center the scale axis
    {ymin,ymax}vertical locations of min and max for the scale
    {horizontal,vertical}horizontal and vertical locations for the scale
  • In gauges with circular axes, ScaleOrigin can take the following values:
  • rradius of the scale
    Left,Right,Bottom,Topon which side to center the scale
    {θmin,θmax}angular locations of min and max for the scale
    {angle,r}angular and radial origins for the scale

ExamplesExamplesopen allclose all

Basic Examples  (4)Basic Examples  (4)

Use ScaleOrigin to specify a horizontal or radial offset for the scale:

In[1]:=
Click for copyable input
Out[1]=

Specify endpoint positions or angles for the scale:

In[1]:=
Click for copyable input
Out[1]=

Use a relative location for the center of the scale:

In[1]:=
Click for copyable input
Out[1]=

Specify a horizontal position and vertical extent for the scale:

In[1]:=
Click for copyable input
Out[1]=

Specify a radial and angular position for the scale:

In[2]:=
Click for copyable input
Out[2]=
Introduced in 2012
(9.0)