WOLFRAM SYSTEM MODELER
FixedFixed flange |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Mechanics.Translational.Components.Fixed"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The flange of a 1D translational mechanical system fixed at an position s0 in the housing. May be used:
- to connect a compliant element, such as a spring or a damper, between a sliding mass and the housing.
- to fix a rigid element, such as a sliding mass, at a specific position.
Parameters (1)
| s0 |
Value: 0 Type: Position (m) Description: Fixed offset position of housing |
|---|
Connectors (1)
 |
flange |
Type: Flange_b Description: One-dimensional translational flange (right, flange axis directed OUT OF cut plane) |
|---|
Used in Examples (12)
 |
Modelica.Magnetic.FluxTubes.Examples.MovingCoilActuator Comparison of the force-current characteristics of both converter models with armature blocked at mid-position |
 |
Modelica.Mechanics.Translational.Examples Examples for the used sign conventions |
 |
Modelica.Mechanics.Translational.Examples Setting of initial conditions |
 |
Modelica.Mechanics.Translational.Examples Use of arrows in Mechanics.Translational |
 |
Modelica.Mechanics.Translational.Examples Use of damper models |
 |
Modelica.Mechanics.Translational.Examples Oscillator demonstrates the use of initial conditions |
 |
Modelica.Mechanics.Translational.Examples Use of model Stop |
 |
Modelica.Mechanics.Translational.Examples Preload of a spool using ElastoGap models |
 |
Modelica.Mechanics.Translational.Examples Demonstrate usage of ElastoGap |
 |
Modelica.Mechanics.Translational.Examples Demonstrate braking of a translational moving mass |
 |
Modelica.Mechanics.Translational.Examples Demonstrate the modeling of heat losses |
 |
Modelica.Thermal.FluidHeatFlow.Examples Two cylinder system |
Used in Components (6)
 |
Modelica.Electrical.Analog.Basic Electromotoric force (electric/mechanic transformer) |
 |
Modelica.Magnetic.FluxTubes.Examples.Utilities Mass with free travel between two stoppers |
 |
Modelica.Mechanics.MultiBody.Joints Prismatic joint (1 translational degree-of-freedom, 2 potential states, optional axis flange) |
 |
PartialElementaryRotationalToTranslational Modelica.Mechanics.Rotational.Interfaces Partial model to transform rotational into translational motion |
 |
Modelica.Mechanics.Translational.Interfaces Partial model for a component with one translational 1-dim. shaft flange and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components |
 |
Modelica.Mechanics.Translational.Interfaces Partial model for a component with two translational 1-dim. shaft flanges and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components |