WOLFRAM SYSTEM MODELER
WindScenarioA simple model of a wind turbine connected to a battery |
![]() |
SystemModel["IndustryExamples.Energy.Battery.WindScenario"]
In this example four battery cells are connected in series in a battery pack. Attached to the battery pack is a wind turbine that charges the battery pack. To simulate this scenario, follow these steps:
Next, a preferred plot will automatically be displayed. This plot should look like this:
The plot shows how the voltage increases from the charge by the wind turbine.
This model is one of five scenarios using the battery cell. For the other scenarios, see the Battery package.
This domain example is an informational resource made freely available by Wolfram Research.
All content in this bundle is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License. By accessing the content or using it in any way, you accept and agree to be bound by the terms of this license. If you do not agree to these Terms of Use, you may not use this content. Wolfram Research reserves the right to change, modify, add to, or remove portions of these Terms of Use at any time without notice. Please refer back to www.wolfram.com for the latest Terms of Use.
A summary of the licensing terms can be found at:
http://creativecommons.org/licenses/by-nc-sa/3.0
The full legal code can be found at:
http://creativecommons.org/licenses/by-nc-sa/3.0/legalcode
L |
Value: 0.01 Type: Inductance (H) Description: Charging inductance |
---|---|
R1 |
Value: 10 Type: Resistance (Ω) Description: Charging resistance |
![]() |
windTurbine |
Type: WindTurbine |
---|---|---|
![]() |
batteryPack |
Type: BatteryPack |
![]() |
fixedTemperature |
Type: FixedTemperature |