WOLFRAM SYSTEMMODELER

partialBooleanSISO

Partial block with 1 input and 1 output Boolean signal

Wolfram Language

In[1]:=
SystemModel["Modelica.Blocks.Interfaces.partialBooleanSISO"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Block has one continuous Boolean input and one continuous Boolean output signal with a 3D icon (e.g., used in Blocks.Logical library).

Connectors (2)

u

Type: BooleanInput

Description: Connector of Boolean input signal

y

Type: BooleanOutput

Description: Connector of Boolean output signal

Extended by (5)

Change

Modelica.Blocks.Logical

Output y is true, if the input u has a rising or falling edge (y = change(u))

FallingEdge

Modelica.Blocks.Logical

Output y is true, if the input u has a falling edge (y = edge(not u))

Edge

Modelica.Blocks.Logical

Output y is true, if the input u has a rising edge (y = edge(u))

Pre

Modelica.Blocks.Logical

Breaks algebraic loops by an infinitesimal small time delay (y = pre(u): event iteration continues until u = pre(u))

Not

Modelica.Blocks.Logical

Logical 'not': y = not u