WOLFRAM SYSTEM MODELER
DeMultiplex4DeMultiplexer block for four output connectors |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Blocks.Routing.DeMultiplex4"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The input connector is split into four output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1, n2, n3 and n4.
Parameters (4)
| n1 |
Value: 1 Type: Integer Description: Dimension of output signal connector 1 |
|---|---|
| n2 |
Value: 1 Type: Integer Description: Dimension of output signal connector 2 |
| n3 |
Value: 1 Type: Integer Description: Dimension of output signal connector 3 |
| n4 |
Value: 1 Type: Integer Description: Dimension of output signal connector 4 |
Connectors (5)
 |
u |
Type: RealInput[n1 + n2 + n3 + n4] Description: Connector of Real input signals |
|---|---|---|
 |
y1 |
Type: RealOutput[n1] Description: Connector of Real output signals 1 |
|
y2 |
Type: RealOutput[n2] Description: Connector of Real output signals 2 |
|
y3 |
Type: RealOutput[n3] Description: Connector of Real output signals 3 |
|
y4 |
Type: RealOutput[n4] Description: Connector of Real output signals 4 |