WOLFRAM SYSTEMMODELER

VariableCapacitor

Ideal linear electrical capacitor with variable capacitance

Wolfram Language

In[1]:=
Click for copyable input
SystemModel["Modelica.Electrical.Analog.Basic.VariableCapacitor"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The linear capacitor connects the branch voltage v with the branch current i by
i = dQ/dt with Q = C * v.
The capacitance C is given as input signal. It is required that C ≥ 0, otherwise an assertion is raised. To avoid a variable index system, C = Cmin, if 0 ≤ C < Cmin, where Cmin is a parameter with default value Modelica.Constants.eps.


Besides the Cmin parameter the capacitor model has got the two parameters IC and UIC that belong together. With the IC parameter the user can specify an initial value of the voltage over the capacitor, which is defined from positive pin p to negative pin n (v=p.v - n.v).


Hence the capacitor is charged at the beginning of the simulation. The other parameter UIC is of type Boolean. If UIC is true, the simulation tool uses


the IC value at the initial calculation by adding the equation v= IC. If UIC is false, the IC value can be used (but it does not need to!) to calculate the initial values in order to simplify the numerical algorithms of initial calculation.

Connectors (3)

p

Type: PositivePin

Description: Positive pin (potential p.v > n.v for positive voltage drop v)

n

Type: NegativePin

Description: Negative pin

C

Type: RealInput

Description:

Parameters (3)

Cmin

Value: Modelica.Constants.eps

Type: Capacitance (F)

Description: lower bound for variable capacitance

IC

Value: 0

Type: Voltage (V)

Description: Initial Value

UIC

Value: false

Type: Boolean

Description:

Used in Components (1)

VariableCapacitor

Ideal linear electrical capacitors with variable capacitance