WOLFRAM SYSTEMMODELER

VariableInductor

Ideal linear electrical inductor with variable inductance

Wolfram Language

In[1]:=
Click for copyable input
SystemModel["Modelica.Electrical.Analog.Basic.VariableInductor"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The linear inductor connects the branch voltage v with the branch current i by
v = d Psi/dt with Psi = L * i .
The inductance L is as input signal. It is required that L ≥ 0, otherwise an assertion is raised. To avoid a variable index system, L = Lmin, if 0 ≤ L < Lmin, where Lmin is a parameter with default value Modelica.Constants.eps.

Besides the Lmin parameter the inductor model has got the two parameters IC and UIC that belong together. With the IC parameter the user can specify an initial value of the current that flows through the inductor.


Hence the inductor has an initial current at the beginning of the simulation. The other parameter UIC is of type Boolean. If UIC is true, the simulation tool uses


the IC value at the initial calculation by adding the equation i= IC. If UIC is false, the IC value can be used (but it does not need to!) to calculate the initial values in order to simplify the numerical algorithms of initial calculation.

Connectors (3)

p

Type: PositivePin

Description: Positive pin (potential p.v > n.v for positive voltage drop v)

n

Type: NegativePin

Description: Negative pin

L

Type: RealInput

Description:

Parameters (3)

Lmin

Value: Modelica.Constants.eps

Type: Inductance (H)

Description: lower bound for variable inductance

IC

Value: 0

Type: Current (A)

Description: Initial Value

UIC

Value: false

Type: Boolean

Description:

Used in Components (1)

VariableInductor

Ideal linear electrical inductors with variable inductance