WOLFRAM SYSTEMMODELER

Idle

Idle branch

Wolfram Language

In[1]:=
SystemModel["Modelica.Electrical.Analog.Ideal.Idle"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The model Idle is a simple idle running branch. That means between both pins no current is running. This ideal device is of no influence on the circuit. Therefore, it can be neglected in each case. For purposes of completeness this component is part of the MSL, as an opposite of the short cut.

Connectors (2)

p

Type: PositivePin

Description: Positive electrical pin

n

Type: NegativePin

Description: Negative electrical pin

Used in Components (1)

Idle

Modelica.Electrical.MultiPhase.Ideal

Multiphase idle branch