WOLFRAM SYSTEM MODELER
PartialConditionalHeatPortPartial model to include a conditional HeatPort in order to dissipate losses, used for graphical modeling, i.e., for building models by drag-and-drop |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Analog.Interfaces.PartialConditionalHeatPort"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides a conditional heat port for dissipating losses.
- If useHeatPort is set to false (default), no heat port is available, and the thermal loss power is dissipated internally. In this case, the parameter T specifies the fixed device temperature (the default for T = 20°C)
- If useHeatPort is set to true, the heat port is available.
If this model is used, the internalHeatPort has to be connected in the model which inherits from PartialElementaryConditionalHeatPort model. The device temperature internalHeatPort.T can be used to describe the influence of the device temperature on the model behaviour.
Parameters (2)
| useHeatPort |
Value: false Type: Boolean Description: =true, if HeatPort is enabled |
|---|---|
| T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
Connectors (2)
 |
heatPort |
Type: HeatPort_a Description: Optional port to which dissipated losses are transported in form of heat |
|---|---|---|
|
internalHeatPort |
Type: HeatPort_a Description: Thermal port for 1-dim. heat transfer (filled rectangular icon) |
Components (1)
 |
fixedTemperature |
Type: FixedTemperature Description: Fixed temperature boundary condition in Kelvin |
|---|
Extended by (3)
 |
Modelica.Electrical.Batteries.BaseClasses Partial cell with sensors |
 |
Modelica.Electrical.Batteries.BaseClasses Battery with open-circuit voltage dependent on state of charge, self-discharge and inner resistance |
 |
Modelica.Electrical.Batteries.BatteryStacks Simple model of a supercapacitor |