WOLFRAM SYSTEM MODELER
CosineCurrentCosine current source |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Analog.Sources.CosineCurrent"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This current source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.
Parameters (5)
| offset |
Value: 0 Type: Current (A) Description: Current offset |
|---|---|
| startTime |
Value: 0 Type: Time (s) Description: Time offset |
| I |
Value: Type: Current (A) Description: Amplitude of cosine wave |
| phase |
Value: 0 Type: Angle (rad) Description: Phase of cosine wave |
| f |
Value: Type: Frequency (Hz) Description: Frequency of cosine wave |
Connectors (2)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
Components (1)
 |
signalSource |
Type: Cosine Description: Generate cosine signal |
|---|
Used in Components (1)
 |
Modelica.Electrical.Polyphase.Sources Polyphase cosine current source |
Revisions
- Initially implemented by Christian Kral on 2013-05-14