WOLFRAM SYSTEM MODELER
PulseCurrentPulse current source |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Analog.Sources.PulseCurrent"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This current source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.
Parameters (5)
| offset |
Value: 0 Type: Current (A) Description: Current offset |
|---|---|
| startTime |
Value: 0 Type: Time (s) Description: Time offset |
| I |
Value: Type: Current (A) Description: Amplitude of pulse |
| width |
Value: Type: Real Description: Width of pulse in % of period |
| period |
Value: Type: Time (s) Description: Time for one period |
Connectors (2)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
Components (1)
 |
signalSource |
Type: Pulse Description: Generate pulse signal of type Real |
|---|
Used in Examples (1)
 |
Modelica.Electrical.Analog.Examples Thyristor demonstration example |
Revisions
- 1998
by Christoph Clauss
initially implemented