WOLFRAM SYSTEM MODELER
CellRCStackBattery with open-circuit voltage dependent on state of charge, self-discharge, inner resistance and a series of RC-elements |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Batteries.BatteryStacks.CellRCStack"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Extends the model CellStack by a series of RC-elements, describing the transient behaviour of the battery.
This model can be used for a single cell Ns = Np = 1 as well as a stack built from identical cells.
For details, see concept and parameterization.
Note
Parameter record array rcData contained in parameter record cellData has to be specified.
The total inner resistance is the sum of the resistance of resistor r0 and the sum of the resistances of the resistors of the RC-elements.
Parameters (6)
| useHeatPort |
Value: false Type: Boolean Description: =true, if HeatPort is enabled |
|---|---|
| T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| Ns |
Value: 1 Type: Integer Description: Number of serial connected cells |
| Np |
Value: 1 Type: Integer Description: Number of parallel connected cells |
| cellData |
Value: Type: CellData Description: Cell parameters |
| SOCtolerance |
Value: 1e-9 Type: Real Description: Tolerance to detect depleted of overcharged battery |
Inputs (1)
| displaySOC |
Default Value: SOC Type: Real Description: SOC for display |
|---|
Outputs (1)
| SOC |
Default Value: limIntegrator.y Type: Real Description: State of charge |
|---|
Connectors (4)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
 |
heatPort |
Type: HeatPort_a Description: Optional port to which dissipated losses are transported in form of heat |
|
internalHeatPort |
Type: HeatPort_a Description: Thermal port for 1-dim. heat transfer (filled rectangular icon) |
Components (11)
 |
fixedTemperature |
Type: FixedTemperature Description: Fixed temperature boundary condition in Kelvin |
|---|---|---|
 |
cellData |
Type: CellData Description: Cell parameters |
 |
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
 |
limIntegrator |
Type: LimIntegrator Description: Integrator with limited value of the output and optional reset |
 |
ocv_soc |
Type: CombiTable1Ds Description: Table look-up in one dimension (matrix/file) with one input and n outputs |
 |
gainV |
Type: Gain Description: Output the product of a gain value with the input signal |
 |
ocv |
Type: SignalVoltage Description: Generic voltage source using the input signal as source voltage |
 |
selfDischarge |
Type: Conductor Description: Ideal linear electrical conductor |
 |
r0 |
Type: Resistor Description: Ideal linear electrical resistor |
|
resistor |
Type: Resistor[cellData.nRC] Description: Ideal linear electrical resistor |
 |
capacitor |
Type: Capacitor[cellData.nRC] Description: Ideal linear electrical capacitor |
Used in Examples (2)
 |
Modelica.Electrical.Batteries.Examples Discharge and charge idealized battery |
 |
Modelica.Electrical.Batteries.Examples Charge a battery with constant current - constant voltage characteristic |