WOLFRAM SYSTEM MODELER

VariableResistor

Ideal linear electrical resistors with variable resistance

Diagram

Wolfram Language

In[1]:=
SystemModel["Modelica.Electrical.Polyphase.Basic.VariableResistor"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Contains m variable resistors (Modelica.Electrical.Analog.Basic.VariableResistor)

Attention!!!
It is recommended that none of the R_Port signals should not cross the zero value. Otherwise depending on the surrounding circuit the probability of singularities is high.

Parameters (6)

m

Value: 3

Type: Integer

Description: Number of phases

mh

Value: m

Type: Integer

Description: Number of heatPorts=number of phases

useHeatPort

Value: false

Type: Boolean

Description: = true, if all heat ports are enabled

T

Value: T_ref

Type: Temperature[mh] (K)

Description: Fixed device temperatures if useHeatPort = false

T_ref

Value: fill(300.15, m)

Type: Temperature[m] (K)

Description: Reference temperatures

alpha

Value: zeros(m)

Type: LinearTemperatureCoefficient[m] (1/K)

Description: Temperature coefficients of resistances at reference temperatures

Connectors (4)

plug_p

Type: PositivePlug

Description: Positive polyphase electrical plug with m pins

plug_n

Type: NegativePlug

Description: Negative polyphase electrical plug with m pins

heatPort

Type: HeatPort_a[mh]

Description: Conditional heat ports

R

Type: RealInput[m]

Description: 'input Real' as connector

Components (1)

variableResistor

Type: VariableResistor[m]

Description: Ideal linear electrical resistor with variable resistance

Used in Components (1)

RampedRheostat

Modelica.Electrical.Machines.Utilities

Rheostat with linearly decreasing resistance