WOLFRAM SYSTEM MODELER

MultiSensor

Polyphase sensor to measure current, voltage and power

Wolfram Language

In[1]:=
SystemModel["Modelica.Electrical.Polyphase.Sensors.MultiSensor"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This multi sensor measures currents, voltages and instantaneous electrical power of a polyphase system and has separated voltage and current paths. The plugs of the voltage paths are pv and nv, the plugs of the current paths are pc and nc. The internal resistance of each current path is zero, the internal resistance of each voltage path is infinite.

Parameters (1)

m

Value: 3

Type: Integer

Description: Number of phases

Connectors (8)

pc

Type: PositivePlug

Description: Positive plug, current path

nc

Type: NegativePlug

Description: Negative plug, current path

pv

Type: PositivePlug

Description: Positive plug, voltage path

nv

Type: NegativePlug

Description: Negative plug, voltage path

i

Type: RealOutput[m]

Description: Current as output signal

v

Type: RealOutput[m]

Description: Voltage as output signal

power

Type: RealOutput[m]

Description: Instantaneous power as output signal

powerTotal

Type: RealOutput

Description: Sum of instantaneous power as output signal

Used in Examples (1)

SMEE_DOL

Modelica.Magnetic.FundamentalWave.Examples.BasicMachines.SynchronousMachines

ElectricalExcitedSynchronousMachine starting direct on line

Used in Components (1)

AnalysatorAC

Modelica.Electrical.Polyphase.Examples.Utilities

Analyze AC voltage, current and power

Revisions

  • 20170306 first implementation by Anton Haumer