WOLFRAM SYSTEM MODELER
Polyphase2LevelPolyphase DC to AC converter |
SystemModel["Modelica.Electrical.PowerConverters.DCAC.Polyphase2Level"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is a polyphase two level inverter. The boolean signals fire_p[k]
and fire_n[k]
for any phase k
shall not be true
at the same time to avoid DC bus short circuits. The inverter consists of 2*m
transistors and two anti parallel free wheeling diodes, respectively, where m
is the number of phases.
useConstantEnable |
Value: true Type: Boolean Description: Disable boolean input and use constantEnable, if true |
---|---|
constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
m |
Value: 3 Type: Integer Description: Number of phases |
useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
RonTransistor |
Value: 1e-05 Type: Resistance (Ω) Description: Transistor closed resistance |
GoffTransistor |
Value: 1e-05 Type: Conductance (S) Description: Transistor opened conductance |
VkneeTransistor |
Value: 0 Type: Voltage (V) Description: Transistor threshold voltage |
RonDiode |
Value: 1e-05 Type: Resistance (Ω) Description: Diode closed resistance |
GoffDiode |
Value: 1e-05 Type: Conductance (S) Description: Diode opened conductance |
VkneeDiode |
Value: 0 Type: Voltage (V) Description: Diode threshold voltage |
fire_p |
Type: BooleanInput[m] Description: Firing signals of positive potential transistors |
|
---|---|---|
enable |
Type: BooleanInput Description: Enables fire and notFire |
|
fire_n |
Type: BooleanInput[m] Description: Firing signals of negative potential transistors |
|
dc_p |
Type: PositivePin Description: Positive DC input |
|
dc_n |
Type: NegativePin Description: Negative DC input |
|
ac |
Type: PositivePlug Description: AC output |
|
heatPort |
Type: HeatPort_a Description: Conditional heat port |
andCondition_p |
Type: And[m] Description: And condition for m positive firing signals |
|
---|---|---|
enableLogic |
Type: EnableLogic Description: Enabling logic |
|
andCondition_n |
Type: And[m] Description: And condition for m negative firing signals |
|
transistor_p |
Type: IdealGTOThyristor Description: Polyphase ideal GTO thyristor |
|
diode_p |
Type: IdealDiode Description: Polyphase ideal diode |
|
star_p |
Type: Star Description: Star-connection |
|
transistor_n |
Type: IdealGTOThyristor Description: Polyphase ideal GTO thyristor |
|
diode_n |
Type: IdealDiode Description: Polyphase ideal diode |
|
star_n |
Type: Star Description: Star-connection |
|
thermalCollector |
Type: ThermalCollector Description: Collects m heat flows |
Modelica.Electrical.Machines.Examples.InductionMachines Test example: InductionMachineSquirrelCage inverter drive |
|
Modelica.Electrical.PowerConverters.Examples.DCAC.PolyphaseTwoLevel Polyphase DC to AC converter with R load |
|
Modelica.Electrical.PowerConverters.Examples.DCAC.PolyphaseTwoLevel Polyphase DC to AC converter with R-L load |