WOLFRAM SYSTEM MODELER
HalfControlledBridge2mPulse2*m pulse half controlled rectifier bridge with resistive load |
SystemModel["Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse.HalfControlledBridge2mPulse"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows a half controlled 2*m
pulse bridge rectifier with resistive load, where m
is the number of phases. In case of resistive load the half controlled bridge shows the same output voltage as the
full controlled bridge.
Plot current currentSensor.i
, average current meanCurrent.y
, voltage voltageSensor.v
and average voltage meanVoltage.v
.
m |
Value: 3 Type: Integer Description: Number of phases |
---|---|
Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
constantFiringAngle |
Value: 30 * pi / 180 Type: Angle (rad) Description: Firing angle |
R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
sineVoltage |
Type: SineVoltage Description: Polyphase sine voltage source |
|
---|---|---|
rectifier |
Type: HalfControlledBridge2mPulse Description: 2*m pulse half controlled rectifier bridge |
|
voltagesensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
|
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
|
rootMeanSquareVoltage |
Type: RootMeanSquare Description: Calculate root mean square over period 1/f |
|
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
|
pulse2m |
Type: VoltageBridge2mPulse Description: Control of 2*m pulse bridge rectifier |
|
multiStarResistance |
Type: MultiStarResistance Description: Resistance connection of star points |
|
ground |
Type: Ground Description: Ground node |
|
resistor |
Type: Resistor Description: Ideal linear electrical resistor |