WOLFRAM SYSTEM MODELER
DiodeCenterTap2PulseTwo pulse diode rectifier with center tap with resistive load |
SystemModel["Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2Pulse.DiodeCenterTap2Pulse"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows an uncontrolled two pulse center tap diode rectifier with resistive load.
Plot current currentSensor.i
, average current meanCurrent.y
, voltage voltageSensor.v
and average voltage meanVoltage.v
.
Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
---|---|
f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
ground |
Type: Ground Description: Ground node |
|
---|---|---|
sinevoltage_n |
Type: SineVoltage Description: Sine voltage source |
|
sinevoltage_p |
Type: SineVoltage Description: Sine voltage source |
|
rectifier |
Type: DiodeCenterTap2Pulse Description: Two pulse diode rectifier with center tap |
|
voltagesensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
|
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
|
rootMeanSquareVoltage |
Type: RootMeanSquare Description: Calculate root mean square over period 1/f |
|
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
|
resistor |
Type: Resistor Description: Ideal linear electrical resistor |