WOLFRAM SYSTEM MODELER
DiodeCenterTapmPulse2*m pulse diode rectifier with center tap with resistive load |
SystemModel["Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTapmPulse.DiodeCenterTapmPulse"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows an uncontrolled m
pulse center tap diode rectifier with resistive load, where m
is the number of phases.
Plot current currentSensor.i
, average current meanCurrent.y
, voltage voltageSensor.v
and average voltage meanVoltage.v
.
m |
Value: 3 Type: Integer Description: Number of phases |
---|---|
Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
ground |
Type: Ground Description: Ground node |
|
---|---|---|
star |
Type: Star Description: Star-connection |
|
sineVoltage_p |
Type: SineVoltage Description: Polyphase sine voltage source |
|
rectifier |
Type: DiodeCenterTapmPulse Description: m pulse diode rectifier with center tap |
|
voltagesensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
|
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
|
rootMeanSquareVoltage |
Type: RootMeanSquare Description: Calculate root mean square over period 1/f |
|
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
|
resistor |
Type: Resistor Description: Ideal linear electrical resistor |