WOLFRAM SYSTEM MODELER
ThyristorCenterTapmPulse_RLV_CharacteristicCharacteristic of 2*m pulse thyristor rectifier with center tap and R-L load and voltage |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTapmPulse.ThyristorCenterTapmPulse_RLV_Characteristic"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows a controlled m pulse center tap rectifier with R-L load including DC voltage source, where m is the number of phases. The additional DC voltage source in this example enables negative average load voltages.
Plot average voltage meanVoltage.v versus firingAngle pulsem.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
Parameters (6)
| m |
Value: 3 Type: Integer Description: Number of phases |
|---|---|
| Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
| f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
| R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
| L |
Value: 1 Type: Inductance (H) Description: Load resistance |
| VDC |
Value: -50 Type: Voltage (V) Description: DC load offset voltage |
Components (14)
 |
ground |
Type: Ground Description: Ground node |
|---|---|---|
 |
star |
Type: Star Description: Star-connection |
 |
sineVoltage_p |
Type: SineVoltage Description: Polyphase sine voltage source |
 |
rectifier |
Type: ThyristorCenterTapmPulse Description: m pulse thyristor rectifier with center tap |
 |
voltagesensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
 |
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
 |
rootMeanSquareVoltage |
Type: RootMeanSquare Description: Calculate root mean square over period 1/f |
 |
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
 |
pulsem |
Type: VoltageBridge2mPulse Description: Control of 2*m pulse bridge rectifier |
 |
resistor |
Type: Resistor Description: Ideal linear electrical resistor |
 |
inductor |
Type: Inductor Description: Ideal linear electrical inductor |
 |
constantVoltage |
Type: ConstantVoltage Description: Source for constant voltage |
 |
ramp |
Type: Ramp Description: Generate ramp signal |