WOLFRAM SYSTEM MODELER
UnsymmetricalLoadUnsymmetrical three-phase load |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.QuasiStatic.Polyphase.Examples.UnsymmetricalLoad"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows an unsymmetrical load, in the upper with neutral connection (the single-phase current sensor measures the neutral current) and in the lower without neutral connection (the single-phase voltage sensor measures the neutral displacement).
Outputs (8)
| i1_d |
Default Value: symmetricalComponents_1.abs_y[1] Type: Current (A) Description: With neutral, direct component |
|---|---|
| i1_i |
Default Value: symmetricalComponents_1.abs_y[2] Type: Current (A) Description: With neutral, inverse component |
| i1_0 |
Default Value: symmetricalComponents_1.abs_y[3] Type: Current (A) Description: With neutral, zero component |
| i1_n |
Default Value: abs(currentSensorN.i) Type: Current (A) Description: With neutral, neutral current |
| i2_d |
Default Value: symmetricalComponents_2.abs_y[1] Type: Current (A) Description: Without neutral, direct component |
| i2_i |
Default Value: symmetricalComponents_2.abs_y[2] Type: Current (A) Description: Without neutral, inverse component |
| i2_0 |
Default Value: symmetricalComponents_2.abs_y[3] Type: Current (A) Description: Without neutral, zero component |
| v2_n |
Default Value: abs(voltageSensorN.v) Type: Voltage (V) Description: Without neutral, neutral voltage |
Components (28)
 |
voltageSource1 |
Type: VoltageSource Description: Constant polyphase AC voltage |
|---|---|---|
 |
star1_1 |
Type: Star Description: Star connection |
 |
ground1 |
Type: Ground Description: Electrical ground |
|
voltageSource2 |
Type: VoltageSource Description: Constant polyphase AC voltage |
|
star2_1 |
Type: Star Description: Star connection |
|
ground2 |
Type: Ground Description: Electrical ground |
 |
currentSensor1 |
Type: CurrentSensor Description: Current Sensor |
 |
symmetricalComponents_1 |
Type: SymmetricalComponents Description: Creates symmetrical components from signals representing quasi-static phasors |
|
currentSensor2 |
Type: CurrentSensor Description: Current Sensor |
|
symmetricalComponents_2 |
Type: SymmetricalComponents Description: Creates symmetrical components from signals representing quasi-static phasors |
 |
resistor1_1 |
Type: Resistor Description: Single-phase linear resistor |
|
resistor1_2 |
Type: Resistor Description: Single-phase linear resistor |
|
resistor1_3 |
Type: Resistor Description: Single-phase linear resistor |
 |
inductor1_2 |
Type: Inductor Description: Single-phase linear inductor |
 |
capacitor1_3 |
Type: Capacitor Description: Single-phase linear capacitor |
|
resistor2_1 |
Type: Resistor Description: Single-phase linear resistor |
|
resistor2_2 |
Type: Resistor Description: Single-phase linear resistor |
|
resistor2_3 |
Type: Resistor Description: Single-phase linear resistor |
|
inductor2_2 |
Type: Inductor Description: Single-phase linear inductor |
|
capacitor2_3 |
Type: Capacitor Description: Single-phase linear capacitor |
 |
plugToPins_p_1 |
Type: PlugToPins_p Description: Connect all (positive) pins |
|
plugToPins_p_2 |
Type: PlugToPins_p Description: Connect all (positive) pins |
 |
plugToPins_n_1 |
Type: PlugToPins_n Description: Connect all (negative) pins |
|
plugToPins_n_2 |
Type: PlugToPins_n Description: Connect all (negative) pins |
|
star1_2 |
Type: Star Description: Star connection |
|
star2_2 |
Type: Star Description: Star connection |
 |
currentSensorN |
Type: CurrentSensor Description: Current sensor |
 |
voltageSensorN |
Type: VoltageSensor Description: Voltage sensor |