WOLFRAM SYSTEM MODELER

TwoPlugElementary

Two plugs with pin-adapter and reference connection, without declaration of voltage and current

Diagram

Wolfram Language

In[1]:=
SystemModel["Modelica.Electrical.QuasiStatic.Polyphase.Interfaces.TwoPlugElementary"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This partial model uses a positive and negative plug but no complex voltage, current, power, etc. A positive and a negative adapter are used to give easy access to the single pins of both plugs. Additionally, the angular velocity of the quasi-static system is explicitly defined as variable. This model is mainly intended to be used with graphical representation of user models.

See also

PositivePlug, NegativePlug, TwoPlug, OnePort

Parameters (1)

m

Value: 3

Type: Integer

Description: Number of phases

Connectors (2)

plug_p

Type: PositivePlug

Description: Positive quasi-static polyphase plug

plug_n

Type: NegativePlug

Description: Negative quasi-static polyphase plug

Components (2)

plugToPins_p

Type: PlugToPins_p

Description: Connect all (positive) pins

plugToPins_n

Type: PlugToPins_n

Description: Connect all (negative) pins

Extended by (2)

RelativeSensorElementary

Modelica.Electrical.QuasiStatic.Polyphase.Interfaces

Elementary partial voltage / current sensor

TwoPlug

Modelica.Electrical.QuasiStatic.Polyphase.Interfaces

Two plugs with pin-adapter, reference connection and declaration of voltage and current