WOLFRAM SYSTEM MODELER
VariableConductorSingle-phase variable conductor |
SystemModel["Modelica.Electrical.QuasiStatic.SinglePhase.Basic.VariableConductor"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The linear conductor connects the voltage v
with the
current i
by i = G*v
.
The conductance G
is given as input signal.
The variable conductor model also has an optional conditional heat port. A linear temperature dependency of the conductance is also taken into account.
Resistor, Conductor, Capacitor, Inductor, Impedance, Admittance, Variable resistor, Variable capacitor, Variable inductor, Variable impedance, Variable admittance
useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
---|---|
T |
Value: T_ref Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
T_ref |
Value: 293.15 Type: Temperature (K) Description: Reference temperature |
alpha_ref |
Value: 0 Type: LinearTemperatureCoefficient (1/K) Description: Temperature coefficient of conductance (G_actual = G_ref/(1 + alpha_ref*(heatPort.T - T_ref)) |
pin_p |
Type: PositivePin Description: Positive quasi-static single-phase pin |
|
---|---|---|
pin_n |
Type: NegativePin Description: Negative quasi-static single-phase pin |
|
heatPort |
Type: HeatPort_a Description: Conditional heat port |
|
G_ref |
Type: RealInput Description: Variable conductance |
v |
Type: ComplexVoltage Description: Complex voltage |
|
---|---|---|
i |
Type: ComplexCurrent Description: Complex current |
Modelica.Electrical.QuasiStatic.Polyphase.Basic Polyphase variable conductor |