WOLFRAM SYSTEM MODELER
VariableConductorSingle phase variable conductor |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.QuasiStationary.SinglePhase.Basic.VariableConductor"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The linear conductor connects the voltage v with the
current i by i = G*v.
The conductance G is given as input signal.
The variable conductor model also has an optional conditional heat port. A linear temperature dependency of the conductance is also taken into account.
See also
Resistor, Conductor, Capacitor, Inductor, Impedance, Admittance, Variable resistor, Variable capacitor, Variable inductor, Variable impedance, Variable admittance
Parameters (4)
| useHeatPort |
Value: false Type: Boolean Description: =true, if heatPort is enabled |
|---|---|
| T |
Value: T_ref Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| T_ref |
Value: 293.15 Type: Temperature (K) Description: Reference temperature |
| alpha_ref |
Value: 0 Type: LinearTemperatureCoefficient (1/K) Description: Temperature coefficient of conductance (G_actual = G_ref/(1 + alpha_ref*(heatPort.T - T_ref)) |
Connectors (4)
 |
pin_p |
Type: PositivePin Description: Positive quasi-static single-phase pin |
|---|---|---|
 |
pin_n |
Type: NegativePin Description: Negative quasi-static single-phase pin |
 |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
 |
G_ref |
Type: RealInput Description: Variable conductance |
Components (2)
 |
v |
Type: ComplexVoltage Description: Complex voltage |
|---|---|---|
 |
i |
Type: ComplexCurrent Description: Complex current |
Used in Components (1)
 |
Modelica.Electrical.QuasiStationary.MultiPhase.Basic Multiphase variable conductor |