WOLFRAM SYSTEM MODELER
RelativePressureIdeal relative pressure sensor |
SystemModel["Modelica.Fluid.Sensors.RelativePressure"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The relative pressure "port_a.p - port_b.p" is determined between the two ports of this component and is provided as output signal. The sensor should be connected in parallel with other equipment, no flow through the sensor is allowed.
port_a |
Type: FluidPort_a Description: Generic fluid connector at design inlet |
|
---|---|---|
port_b |
Type: FluidPort_b Description: Generic fluid connector at design outlet |
|
p_rel |
Type: RealOutput Description: Relative pressure signal |