WOLFRAM SYSTEM MODELER
RelativeTemperatureIdeal relative temperature sensor |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Fluid.Sensors.RelativeTemperature"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The relative temperature "T(port_a) - T(port_b)" is determined between the two ports of this component and is provided as output signal. The sensor should be connected in parallel with other equipment, no flow through the sensor is allowed.
Connectors (3)
 |
port_a |
Type: FluidPort_a Description: Generic fluid connector at design inlet |
|---|---|---|
 |
port_b |
Type: FluidPort_b Description: Generic fluid connector at design outlet |
 |
T_rel |
Type: RealOutput Description: Relative temperature signal |