WOLFRAM SYSTEM MODELER
SpecificEnthalpyTwoPortIdeal two port sensor for the specific enthalpy |
SystemModel["Modelica.Fluid.Sensors.SpecificEnthalpyTwoPort"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This component monitors the specific enthalpy of a passing fluid. The sensor is ideal, i.e., it does not influence the fluid.
allowFlowReversal |
Value: system.allowFlowReversal Type: Boolean Description: = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
---|---|
m_flow_nominal |
Value: system.m_flow_nominal Type: MassFlowRate (kg/s) Description: Nominal value of m_flow = port_a.m_flow |
m_flow_small |
Value: if system.use_eps_Re then system.eps_m_flow * m_flow_nominal else system.m_flow_small Type: MassFlowRate (kg/s) Description: Regularization for bi-directional flow in the region |m_flow| < m_flow_small (m_flow_small > 0 required) |
port_a |
Type: FluidPort_a Description: Fluid connector a (positive design flow direction is from port_a to port_b) |
|
---|---|---|
port_b |
Type: FluidPort_b Description: Fluid connector b (positive design flow direction is from port_a to port_b) |
|
h_out |
Type: RealOutput Description: Specific enthalpy of the passing fluid |
system |
Type: System Description: System wide properties |
---|