WOLFRAM SYSTEM MODELER
SpecificEntropyTwoPortIdeal two port sensor for the specific entropy |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Fluid.Sensors.SpecificEntropyTwoPort"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This component monitors the specific entropy of the passing fluid. The sensor is ideal, i.e., it does not influence the fluid.
Parameters (3)
| allowFlowReversal |
Value: system.allowFlowReversal Type: Boolean Description: = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
|---|---|
| m_flow_nominal |
Value: system.m_flow_nominal Type: MassFlowRate (kg/s) Description: Nominal value of m_flow = port_a.m_flow |
| m_flow_small |
Value: if system.use_eps_Re then system.eps_m_flow * m_flow_nominal else system.m_flow_small Type: MassFlowRate (kg/s) Description: Regularization for bi-directional flow in the region |m_flow| < m_flow_small (m_flow_small > 0 required) |
Connectors (3)
 |
port_a |
Type: FluidPort_a Description: Fluid connector a (positive design flow direction is from port_a to port_b) |
|---|---|---|
 |
port_b |
Type: FluidPort_b Description: Fluid connector b (positive design flow direction is from port_a to port_b) |
 |
s |
Type: RealOutput Description: Specific entropy of the passing fluid |
Components (1)
 |
system |
Type: System Description: System wide properties |
|---|