WOLFRAM SYSTEM MODELER
IMS_CharacteristicsCharacteristic curves of induction machine with slip rings |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Magnetic.QuasiStatic.FundamentalWave.Examples.BasicMachines.InductionMachines.IMS_Characteristics"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This examples allows the investigation of characteristic curves of quasi-static polyphase induction machines with slip ring rotor as a function of rotor speed.
Simulate for 1 second and plot (versus imsQS.wMechanical or perUnitSpeed):
currentSensorQS.abs_i[1]: (equivalent) RMS stator currentimsQS.tauElectrical: machine torqueimscQS.powerBalance.powerStator: stator powerimsQS.powerBalance.powerMechanical: mechanical power
Default machine parameters are used. The rotor resistance may be varied to demonstrate the impact on the characteristic curves
Parameters (8)
| m |
Value: 3 Type: Integer Description: Number of stator phases |
|---|---|
| mr |
Value: 3 Type: Integer Description: Number of rotor phases |
| VsNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
| fNominal |
Value: imsData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
| Rr |
Value: 0.16 / imsData.turnsRatio ^ 2 Type: Resistance (Ω) Description: Starting resistance |
| p |
Value: imsData.p Type: Integer Description: Number of pole pairs |
| w_Load |
Value: Modelica.Units.Conversions.from_rpm(1440.45) Type: AngularVelocity (rad/s) Description: Nominal load speed |
| imsData |
Value: Type: IM_SlipRingData Description: Induction machine data |
Outputs (1)
| Iqs |
Default Value: iSensorQS.I Type: Current (A) Description: QS RMS current |
|---|
Components (15)
 |
terminalBoxQS |
Type: MultiTerminalBox Description: Terminal box Y/D-connection |
|---|---|---|
 |
imsQS |
Type: IM_SlipRing Description: Induction machine with slip ring rotor |
 |
imsData |
Type: IM_SlipRingData Description: Induction machine data |
 |
vSourceQS |
Type: VoltageSource Description: Constant polyphase AC voltage |
 |
starQS |
Type: Star Description: Star connection |
 |
groundQS |
Type: Ground Description: Electrical ground |
 |
pSensorQS |
Type: PowerSensor Description: Power sensor |
 |
iSensorQS |
Type: CurrentQuasiRMSSensor Description: Continuous quasi current RMS sensor for polyphase system |
|
starMachineQS |
Type: Star Description: Star connection |
|
groundMachineQS |
Type: Ground Description: Electrical ground |
 |
speed |
Type: Speed Description: Forced movement of a flange according to a reference angular velocity signal |
 |
ramp |
Type: Ramp Description: Generate ramp signal |
|
groundRotorQS |
Type: Ground Description: Electrical ground |
|
starRotorQS |
Type: Star Description: Star connection |
 |
resistor |
Type: Resistor Description: Polyphase linear resistor |