WOLFRAM SYSTEM MODELER

Flange_a

One-dimensional translational flange (left, flange axis directed INTO cut plane)

Wolfram Language

In[1]:=
SystemModel["Modelica.Mechanics.Translational.Interfaces.Flange_a"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a connector for 1-dim. translational mechanical systems which represents a mechanical flange. In the cut plane of the flange a unit vector n, called flange axis, is defined which is directed INTO the cut plane, i. e. from left to right. All vectors in the cut plane are resolved with respect to this unit vector. E.g. force f characterizes a vector which is directed in the direction of n with value equal to f. When this flange is connected to other 1D translational flanges, this means that the axes vectors of the connected flanges are identical.

The following variables are transported through this connector:

s: Absolute position of the flange in [m]. A positive translation
   means that the flange is translated along the flange axis.
f: Cut-force in direction of the flange axis in [N].

Connector Variables (1)

s

Causality: None

Type: Position (m)

Description: Absolute position of flange

Flow Variables (1)

f

Type: Force (N)

Description: Cut force directed into flange

Used in Components (13)

TranslatoryArmatureAndStopper

Modelica.Magnetic.FluxTubes.Examples.Utilities

Mass with free travel between two stoppers

LineForceWithMass

Modelica.Mechanics.MultiBody.Forces

General line force component with an optional point mass on the connection line

LineForceWithTwoMasses

Modelica.Mechanics.MultiBody.Forces

General line force component with two optional point masses on the connection line

Prismatic

Modelica.Mechanics.MultiBody.Joints

Prismatic joint (1 translational degree-of-freedom, 2 potential states, optional axis flange)

JointUPS

Modelica.Mechanics.MultiBody.Joints.Assemblies

Universal - prismatic - spherical joint aggregation (no constraints, no potential states)

JointUSP

Modelica.Mechanics.MultiBody.Joints.Assemblies

Universal - spherical - prismatic joint aggregation (no constraints, no potential states)

JointSSP

Modelica.Mechanics.MultiBody.Joints.Assemblies

Spherical - spherical - prismatic joint aggregation with mass (no constraints, no potential states)

JointRRP

Modelica.Mechanics.MultiBody.Joints.Assemblies

Planar revolute - revolute - prismatic joint aggregation (no constraints, no potential states)

PrismaticWithLengthConstraint

Modelica.Mechanics.MultiBody.Joints.Internal

Prismatic joint where the translational distance is computed from a length constraint (1 degree-of-freedom, no potential state)

GeneralForceToPositionAdaptor

Modelica.Mechanics.Translational.Components

Signal adaptor for a Translational flange with position, speed, and acceleration as outputs and force as input (especially useful for FMUs)

InternalSupport

Modelica.Mechanics.Translational.Interfaces

Adapter model to utilize conditional support connector

PartialTwoFlanges

Modelica.Mechanics.Translational.Interfaces

Component with two translational 1D flanges

PartialAbsoluteSensor

Modelica.Mechanics.Translational.Interfaces

Device to measure a single absolute flange variable