WOLFRAM SYSTEM MODELER
DensityType for density with medium specific attributes |
SystemModel["Modelica.Media.Interfaces.Types.Density"]
Density |
Quantity: "Density" Unit: kg/m³ Display Unit: g/cm³ Restricted Range: 0 to 1.e5 Nominal Value: 1 |
---|
Modelica.Fluid.Examples.DrumBoiler.BaseClasses Simple Evaporator with two states, see Åström, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378 |
|
TankWith3InletOutletArraysWithEvaporatorCondensor Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses Tank with Heating and Evaporation |
|
Modelica.Fluid.Vessels.BaseClasses Lumped volume with a vector of fluid ports and replaceable heat transfer model |
|
Modelica.Fluid.Pipes.BaseClasses.FlowModels Base class for momentum balances in flow models |
|
Modelica.Fluid.Pipes.BaseClasses.HeatTransfer Base class for pipe heat transfer correlation in terms of Nusselt number heat transfer in a circular pipe for laminar and turbulent one-phase flow |
|
Modelica.Fluid.Machines.BaseClasses Base model for centrifugal pumps |
|
Modelica.Fluid.Machines.BaseClasses.PumpMonitoring Monitor Net Positive Suction Head (NPSH) |
|
Modelica.Fluid.Valves.BaseClasses Base model for valves |
|
Modelica.Fluid.Fittings.GenericResistances Flow model for generic resistance parameterized with the volume flow rate |
|
Modelica.Fluid.Fittings Simple generic orifice defined by pressure loss coefficient and diameter (only for flow from port_a to port_b) |
|
Modelica.Fluid.Sources Boundary source component |
|
Modelica.Fluid.Sensors Ideal two port density sensor |
|
Modelica.Fluid.Sensors Ideal sensor for volume flow rate |
|
Modelica.Fluid.Interfaces Base flow model for pressure loss functions with the same area at port_a and at port_b |
|
Modelica.Media.Examples.Utilities Fixed volume associated with a port by the finite volume method |
|
Modelica.Media.Examples.Utilities Ambient pressure, temperature and mass fraction source |
|
Modelica.Media.Interfaces.PartialMedium Base properties (p, d, T, h, u, R_s, MM and, if applicable, X and Xi) of a medium |
|
Modelica.Media.Interfaces.Types Validity limits for fluid model |
|
Modelica.Media.Air.ReferenceAir.Air_Base Thermodynamic state |
|
Modelica.Media.R134a.R134a_ph Thermodynamic state |
|
Modelica.Media.Water.WaterIF97_base Thermodynamic state |