WOLFRAM SYSTEM MODELER

MassFraction

Type for mass fraction with medium specific attributes

Wolfram Language

In[1]:=
SystemModel["Modelica.Media.Interfaces.Types.MassFraction"]
Out[1]:=

Type Information

MassFraction

Quantity: "MassFraction"

Unit: kg/kg

Restricted Range: 0 to 1

Nominal Value: 0.1

Used in Components (21)

TankWith3InletOutletArraysWithEvaporatorCondensor

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

Tank with Heating and Evaporation

InnerTank

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

BasicHX

Modelica.Fluid.Examples.HeatExchanger.BaseClasses

Simple heat exchanger model

MultiPort

Modelica.Fluid.Fittings

Multiply a port; useful if multiple connections shall be made to a port exposing a state

FixedBoundary

Modelica.Fluid.Sources

Boundary source component

Boundary_pT

Modelica.Fluid.Sources

Boundary with prescribed pressure, temperature, composition and trace substances

Boundary_ph

Modelica.Fluid.Sources

Boundary with prescribed pressure, specific enthalpy, composition and trace substances

MassFlowSource_T

Modelica.Fluid.Sources

Ideal flow source that produces a prescribed mass flow with prescribed temperature, mass fraction and trace substances

MassFlowSource_h

Modelica.Fluid.Sources

Ideal flow source that produces a prescribed mass flow with prescribed specific enthalpy, mass fraction and trace substances

MassFractions

Modelica.Fluid.Sensors

Ideal one port mass fraction sensor

PartialLumpedVolume

Modelica.Fluid.Interfaces

Lumped volume with mass and energy balance

PartialDistributedVolume

Modelica.Fluid.Interfaces

Base class for distributed volume models

ExtendedProperties

Modelica.Media.Examples.TwoPhaseWater

Plenty of two-phase properties

PortVolume

Modelica.Media.Examples.Utilities

Fixed volume associated with a port by the finite volume method

FixedMassFlowRate

Modelica.Media.Examples.Utilities

Ideal pump that produces a constant mass flow rate from a large reservoir at fixed temperature and mass fraction

FixedAmbient

Modelica.Media.Examples.Utilities

Ambient pressure, temperature and mass fraction source

BaseProperties

Modelica.Media.Interfaces.PartialMedium

Base properties (p, d, T, h, u, R_s, MM and, if applicable, X and Xi) of a medium

ThermodynamicState

Modelica.Media.Interfaces.PartialMixtureMedium

Thermodynamic state variables

BaseProperties

Modelica.Media.Air.MoistAir

Moist air base properties record

BaseProperties

Modelica.Media.Air.ReferenceMoistAir

Moist air base properties record

BaseProperties

Modelica.Media.R134a.R134a_ph

Base properties of R134a