WOLFRAM SYSTEM MODELER
TestOpenTankTest the OpenTank model |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Thermal.FluidHeatFlow.Examples.TestOpenTank"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
First, the medium is pumped out of the tank (initial level = 0.5 m, T = 40°C) to an (infinite) ambient (T = 20°C):
- The level of the medium in the tank decreases.
- The temperature of the medium in the tank remains unchanged.
Subsequently the medium is pumped into the tank from an (infinite) ambient:
- The level of the medium in the tank increases again.
- The temperature of the medium in the tank decreases (mixing temperature).
Outputs (3)
| V_flow |
Default Value: volumeFlow.V_flow Type: VolumeFlowRate (m³/s) Description: Volume flow rate to tank |
|---|---|
| level |
Default Value: openTank.level Type: Length (m) Description: Level in tank |
| T |
Default Value: openTank.TTank Type: Temperature (K) Description: Temperature in tank |
Components (4)
 |
openTank |
Type: OpenTank Description: Model of a tank under ambient pressure |
|---|---|---|
 |
ambient |
Type: Ambient Description: Ambient with constant properties |
 |
volumeFlow |
Type: VolumeFlow Description: Enforces constant volume flow |
 |
combiTimeTable |
Type: CombiTimeTable Description: Table look-up with respect to time and linear/periodic extrapolation methods (data from matrix/file) |