WOLFRAM SYSTEM MODELER

PartialConditionalHeatPort

Partial model to include a conditional HeatPort in order to dissipate losses, used for graphical modeling, i.e., for building models by drag-and-drop

Diagram

Wolfram Language

In[1]:=

SystemModel["Modelica.Thermal.HeatTransfer.Interfaces.PartialConditionalHeatPort"]

Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This partial model provides a conditional heat port for dissipating losses.

If useHeatPort is set to false (default), no heat port is available, and the thermal loss power is dissipated internally. In this case, the parameter T specifies the fixed device temperature (the default for T = 20°C)
If useHeatPort is set to true, the heat port is available.

If this model is used, the internalHeatPort has to be connected in the model which inherits from PartialElementaryConditionalHeatPort model. The device temperature internalHeatPort.T can be used to describe the influence of the device temperature on the model behaviour.

Parameters (2)

useHeatPort	Value: false Type: Boolean Description: = true, if HeatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false

useHeatPort

Value: false

Type: Boolean

Description: = true, if HeatPort is enabled

Value: 293.15

Type: Temperature (K)

Description: Fixed device temperature if useHeatPort = false

Connectors (2)

	heatPort	Type: HeatPort_a Description: Optional port to which dissipated losses are transported in form of heat
	internalHeatPort	Type: HeatPort_a Description: Thermal port for 1-dim. heat transfer (filled rectangular icon)