WOLFRAM SYSTEM MODELER

Height

Wolfram Language

In[1]:=
SystemModel["Modelica.Units.SI.Height"]
Out[1]:=

Type Information

Height

Quantity: "Length"

Unit: m

Restricted Range: 0 to +Inf

Used in Components (7)

TankController

Modelica.Fluid.Examples.ControlledTankSystem.Utilities

Controller for tank system

NormalOperation

Modelica.Fluid.Examples.ControlledTankSystem.Utilities

Normal operation of tank system (button start pressed)

TankWith3InletOutletArraysWithEvaporatorCondensor

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

Tank with Heating and Evaporation

TankWithTopPorts

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

Tank with inlet/outlet ports and with inlet ports at the top

OpenTank

Modelica.Fluid.Vessels

Simple tank with inlet/outlet ports

PartialLumpedVessel

Modelica.Fluid.Vessels.BaseClasses

Lumped volume with a vector of fluid ports and replaceable heat transfer model

VesselPortsData

Modelica.Fluid.Vessels.BaseClasses

Data to describe inlet/outlet ports at vessels: diameter -- Inner (hydraulic) diameter of inlet/outlet port height -- Height over the bottom of the vessel zeta_out -- Hydraulic resistance out of vessel, default 0.5 for small diameter mounted flush with the wall zeta_in -- Hydraulic resistance into vessel, default 1.04 for small diameter mounted flush with the wall