WOLFRAM SYSTEM MODELER
WriteA block for writing data to items on an OPC server at intervals determined by parameter samplePeriod |
 |
Wolfram Language
In[1]:=
SystemModel["OPCUA.Blocks.SamplerBoolean.Write"]
Out[1]:=
Information
This block writes data of scalar type Boolean from the OPC server it is connected to. It inherits the properties of the partial model Sampler, which contains parameters such as samplePeriod, nodeID, nodeNamespace, and nodeIDType that determine how often and to which OPC node the data should be written. Only scalar nodes can be written to; i.e. no array or matrix nodes are supported.
At every sampling instant, external function writeExternalBoolean is called from within the block.
Relevant Parameters
- samplePeriod: determines how often to sample data from the OPC item
- startTime: when the block should start to read data
- nodeID: which OPC UA node to write data to (ID value should always be inside quotes)
- nodeNamespace: which namespace the node is located in
- nodeIDType: which ID type to use, numeric or string
Interfaces
- u: a Boolean input, which is the signal to be sampled and written to the OPC server
- serverID: the connector that connects the block to the OPC server component
Parameters (5)
| samplePeriod |
Value: Type: Time (s) Description: Sample period of component |
|---|---|
| startTime |
Value: 0 Type: Time (s) Description: First sample time instant |
| nodeIDType |
Value: Type: UANodeIdType Description: The node identifier type |
| nodeID |
Value: Type: String Description: The node identifier |
| nodeNamespace |
Value: Type: Integer Description: The node namespace |
Outputs (2)
| sampleTrigger |
Type: Boolean Description: True, if sample time instant |
|---|---|
| firstTrigger |
Type: Boolean Description: Rising edge signals first sample instant |
Connectors (2)
 |
serverID |
Type: BlockConnector Description: The unique ID of the server the block is connected to |
|---|---|---|
 |
u |
Type: BooleanInput Description: Input signal to be sampled |
Used in Examples (2)
 |
OPCUA.Examples Basic example that demonstrates how to write to and read from nodes on an OPC UA server |
 |
OPCUA.Examples Example that demonstrates the interaction of an OPC UA server with a Raspberry Pi |