WOLFRAM SYSTEMMODELER
TSensor_degCTemperature celsius sensor |
 |
Wolfram Language
In[1]:=
SystemModel["SmartCooling.Sensors.TSensor_degC"]
Out[1]:=
Information
This model represents a medium temperature sensor in Celsius degree. The sensor connector flowPort must be connected with a connector of another component in a pipeline. The output signal, temperature_degC, is the temperature in degrees Celsius of the medium in the connector of the connected component.
Parameters (1)
| medium |
Value: SmartCooling.Medium.Medium() Type: Medium Description: medium type |
|---|
Connectors (2)
 |
flowPort |
Type: FlowPort_a Description: flow port |
|---|---|---|
 |
temperature_degC |
Type: RealOutput Description: fluid temperature in Celsius degree |
Components (1)
 |
medium |
Type: Medium Description: medium type |
|---|
Used in Examples (1)
 |
SmartCooling.Examples
Example with an engine |