WOLFRAM SYSTEM MODELER
ChargerCharges the battery |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["EducationExamples.ElectricalEngineering.UPS.Components.Charger"]
Out[1]:=
Information
This model checks the voltage level on the input and compares it to referenceVoltage. If there is more than a 5V difference between the levels for a certain amount of time, it will start the battery.
Connectors (2)
 |
pin_p |
Type: PositivePin Description: Positive pin of an electrical component |
|---|---|---|
 |
y |
Type: BooleanOutput Description: 'output Boolean' as connector |
Components (7)
 |
potentialSensor1 |
Type: PotentialSensor Description: Sensor to measure the potential |
|---|---|---|
 |
lessEqualThreshold |
Type: GreaterEqualThreshold Description: Output y is true, if input u is greater or equal than threshold |
 |
referenceVoltage |
Type: Sine Description: Generate sine signal |
 |
compare |
Type: Add Description: Output the sum of the two inputs |
 |
abs1 |
Type: Abs Description: Output the absolute value of the input |
 |
timer |
Type: Timer Description: Timer measuring the time from the time instant where the Boolean input became true |
 |
hysteresis |
Type: Hysteresis Description: Transform Real to Boolean signal with Hysteresis |
Used in Examples (2)
 |
EducationExamples.ElectricalEngineering.UPS Model of an uninterruptible power supply that controls the supply of power to a load. |
 |
EducationExamples.ElectricalEngineering.UPS Model of a uninterruptible power supply with a non-standard battery reliability. |