WOLFRAM SYSTEM MODELER
MotorScenarioA DC Motor powered by a battery pack |
![]() |
SystemModel["IndustryExamples.Energy.Battery.MotorScenario"]
In this example four battery cells are connected in series in a battery package. Attached to the battery pack is a DC motor and a load. To simulate this scenario follow these steps:
Next, a preferred stored plot will automatically be displayed. This plot should look like this:
The plots show the voltage output of the battery pack and the velocity of the load.
This model is one of five scenarios using the battery cell. For the other scenarios, see the Battery package.
This domain example is an informational resource made freely available by Wolfram Research.
All content in this bundle is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License. By accessing the content or using it in any way, you accept and agree to be bound by the terms of this license. If you do not agree to these Terms of Use, you may not use this content. Wolfram Research reserves the right to change, modify, add to, or remove portions of these Terms of Use at any time without notice. Please refer back to www.wolfram.com for the latest Terms of Use.
A summary of the licensing terms can be found at:
http://creativecommons.org/licenses/by-nc-sa/3.0
The full legal code can be found at:
http://creativecommons.org/licenses/by-nc-sa/3.0/legalcode
T |
Value: 20 Type: Temperature_degC (°C) Description: Fixed ambient temperature |
---|---|
m |
Value: 10 Type: Mass (kg) Description: Mass of the load |
![]() |
DCMotor |
Type: Motor Description: A simple DC Motor |
---|---|---|
![]() |
BatteryPack1 |
Type: BatteryPack Description: A battery pack |
![]() |
Load1 |
Type: Load Description: A load to discharge the battery |
![]() |
fixedTemperature1 |
Type: FixedTemperature |