WOLFRAM SYSTEM MODELER
SawToothCurrentSaw tooth current source |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Analog.Sources.SawToothCurrent"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This current source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.
Parameters (5)
| I |
Type: Current (A) Description: Amplitude of saw tooth |
|---|---|
| period |
Type: Time (s) Description: Time for one period |
| signalSource |
Replaceable Component Type: SawTooth Description: Generate saw tooth signal |
| offset |
Value: 0 Type: Current (A) Description: Current offset |
| startTime |
Value: 0 Type: Time (s) Description: Time offset |
Connectors (2)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
Components (1)
 |
signalSource |
Type: SawTooth Description: Generate saw tooth signal |
|---|
Revisions
- 1998
by Christoph Clauss
initially implemented