WOLFRAM SYSTEM MODELER
DiodeCenterTap2mPulse2*m pulse diode rectifier with center tap |
SystemModel["Modelica.Electrical.PowerConverters.ACDC.DiodeCenterTap2mPulse"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse diode rectifier with center tap. In order to operate this rectifier a voltage source with center tap is required. The center tap has to be connected with the negative pin of the load. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2mPulse.
useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
---|---|
T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
m |
Value: 3 Type: Integer Description: Number of phases |
RonDiode |
Value: 1e-05 Type: Resistance (Ω) Description: Closed diode resistance |
GoffDiode |
Value: 1e-05 Type: Conductance (S) Description: Opened diode conductance |
VkneeDiode |
Value: 0 Type: Voltage (V) Description: Diode forward threshold voltage |
ac_p |
Type: PositivePlug Description: Positive potential AC input |
|
---|---|---|
ac_n |
Type: NegativePlug Description: Negative potential AC input |
|
dc_p |
Type: PositivePin Description: Positive DC output |
|
heatPort |
Type: HeatPort_a Description: Conditional heat port |
diode_p |
Type: IdealDiode Description: Diodes connected to positive DC potential |
|
---|---|---|
diode_n |
Type: IdealDiode Description: Diodes connected to negative DC potential |
|
star_p |
Type: Star Description: Star-connection |
|
star_n |
Type: Star Description: Star-connection |
|
thermalCollector |
Type: ThermalCollector Description: Collects m heat flows |
Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2mPulse 2*m pulse diode center tap rectifier with resistive load |