WOLFRAM SYSTEM MODELER
DiodeCenterTap2mPulse2*m pulse diode center tap rectifier with resistive load |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2mPulse.DiodeCenterTap2mPulse"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows an uncontrolled 2*m pulse center tap diode rectifier with resistive load, where m is the number of phases.
Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
Parameters (4)
| m |
Value: 3 Type: Integer Description: Number of phases |
|---|---|
| Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
| f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
| R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
Components (11)
 |
ground |
Type: Ground Description: Ground node |
|---|---|---|
 |
star |
Type: Star Description: Star-connection |
 |
sineVoltage_p |
Type: SineVoltage Description: Polyphase sine voltage source |
 |
rectifier |
Type: DiodeCenterTap2mPulse Description: 2*m pulse diode rectifier with center tap |
 |
voltagesensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
 |
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
 |
rootMeanSquareVoltage |
Type: RootMeanSquare Description: Calculate root mean square over period 1/f |
 |
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
|
sineVoltage_n |
Type: SineVoltage Description: Polyphase sine voltage source |
 |
resistor |
Type: Resistor Description: Ideal linear electrical resistor |