WOLFRAM SYSTEM MODELER
ChopperStepDown_RStep down chopper with resistive load |
SystemModel["Modelica.Electrical.PowerConverters.Examples.DCDC.ChopperStepDown.ChopperStepDown_R"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example demonstrates the switching on of a resistive load operated by a step down chopper.
DC output voltage is equal to dutyCycle
times the input voltage.
Plot current currentSensor.i
, averaged current meanCurrent.y
, total voltage voltageSensor.v
and voltage meanVoltage.v
.
f |
Value: 1000 Type: Frequency (Hz) Description: Switching frequency |
---|---|
Vsource |
Value: 60 Type: Voltage (V) Description: Source voltage |
L |
Value: 25e-3 Type: Inductance (H) Description: Source inductance |
C |
Value: 20e-6 Type: Capacitance (F) Description: Smoothing capacitance |
dutyCycle |
Value: 0.20 Type: Real Description: Duty cycle |
ILoad |
Value: 1.2 Type: Current (A) Description: Load current |
RLoad |
Value: V0 / ILoad Type: Resistance (Ω) Description: Load resistance |
V0 |
Value: Vsource * dutyCycle Type: Voltage (V) Description: No-load output voltage |
constantVoltage |
Type: ConstantVoltage Description: Source for constant voltage |
|
---|---|---|
chopperStepDown |
Type: ChopperStepDown Description: Step down chopper |
|
currentSensor |
Type: CurrentSensor Description: Sensor to measure the current in a branch |
|
voltageSensor |
Type: VoltageSensor Description: Sensor to measure the voltage between two pins |
|
ground |
Type: Ground Description: Ground node |
|
signalPWM |
Type: SignalPWM Description: Generates a pulse width modulated (PWM) boolean fire signal |
|
meanCurrent |
Type: Mean Description: Calculate mean over period 1/f |
|
meanVoltage |
Type: Mean Description: Calculate mean over period 1/f |
|
inductor |
Type: Inductor Description: Ideal linear electrical inductor |
|
capacitor |
Type: Capacitor Description: Ideal linear electrical capacitor |
|
loadResistor |
Type: Resistor Description: Ideal linear electrical resistor |
|
adaptor |
Type: Voltage2DutyCycle Description: Linearly transforms voltage to duty cycle |
|
vRef |
Type: Ramp Description: Generate ramp signal |