WOLFRAM SYSTEM MODELER
Enable2mPartial model providing enable parameter and optional enable input for 2*m firing signals |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2m"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides the enabling logic for 2*m firing signal.
Parameters (3)
| useConstantEnable |
Value: true Type: Boolean Description: Disable boolean input and use constantEnable, if true |
|---|---|
| constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
| m |
Value: 3 Type: Integer Description: Number of phases |
Connectors (3)
 |
fire_p |
Type: BooleanInput[m] Description: Firing signals of positive potential transistors |
|---|---|---|
|
enable |
Type: BooleanInput Description: Enables fire and notFire |
|
fire_n |
Type: BooleanInput[m] Description: Firing signals of negative potential transistors |
Components (3)
 |
andCondition_p |
Type: And[m] Description: And condition for m positive firing signals |
|---|---|---|
 |
enableLogic |
Type: EnableLogic Description: Enabling logic |
|
andCondition_n |
Type: And[m] Description: And condition for m negative firing signals |
Extended by (3)
 |
Modelica.Electrical.PowerConverters.DCAC Polyphase DC to AC converter |
 |
Modelica.Electrical.PowerConverters.ACDC 2*m pulse thyristor rectifier with center tap |
 |
Modelica.Electrical.PowerConverters.ACDC 2*m pulse thyristor rectifier bridge |