WOLFRAM SYSTEM MODELER
IdealIntermediateSwitchPolyphase ideal intermediate switch |
SystemModel["Modelica.Electrical.QuasiStatic.Polyphase.Ideal.IdealIntermediateSwitch"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Contains m ideal intermediate switches (Modelica.Electrical.QuasiStatic.SinglePhase.Ideal.IdealIntermediateSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasi-static formulation.
mh |
Value: m Type: Integer Description: Number of heatPorts=number of phases |
---|---|
useHeatPort |
Value: false Type: Boolean Description: = true, if all heat ports are enabled |
T |
Value: fill(293.15, m) Type: Temperature[mh] (K) Description: Fixed device temperatures if useHeatPort = false |
m |
Value: 3 Type: Integer Description: Number of phases |
Ron |
Value: Type: Resistance[m] (Ω) Description: Closed switch resistance |
Goff |
Value: Type: Conductance[m] (S) Description: Opened switch conductance |
heatPort |
Type: HeatPort_a[mh] Description: Conditional heat ports |
|
---|---|---|
control |
Type: BooleanInput[m] Description: true => p1--n2, p2--n1 connected, otherwise p1--n1, p2--n2 connected |
|
plug_p1 |
Type: PositivePlug Description: Positive quasi-static polyphase plug |
|
plug_p2 |
Type: PositivePlug Description: Positive quasi-static polyphase plug |
|
plug_n2 |
Type: NegativePlug Description: Negative quasi-static polyphase plug |
|
plug_n1 |
Type: NegativePlug Description: Negative quasi-static polyphase plug |
idealIntermediateSwitch |
Type: IdealIntermediateSwitch[m] Description: Ideal intermediate switch |
|
---|---|---|
plugToPins_p1 |
Type: PlugToPins_p Description: Connect all (positive) pins |
|
plugToPins_n1 |
Type: PlugToPins_n Description: Connect all (negative) pins |
|
plugToPins_p2 |
Type: PlugToPins_p Description: Connect all (positive) pins |
|
plugToPins_n2 |
Type: PlugToPins_n Description: Connect all (negative) pins |