WOLFRAM SYSTEM MODELER
SeriesBodeSeries circuit with Bode analysis |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.QuasiStationary.SinglePhase.Examples.SeriesBode"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The frequency of the voltage source is varied by a logarithmic ramp, the supply voltage magnitude is constant.
Plot versus voltageSource.f on a logarithmic scale in order to determine the Bode diagrams of the ratio of
the voltage of the resistor divided by the supply voltage:
- Gain response:
dB_y - Phase response:
arg_y
Outputs (3)
| abs_y |
Default Value: bode.abs_y Type: Real Description: Magnitude of voltage ratio |
|---|---|
| dB_y |
Default Value: bode.dB_y Type: AmplitudeLevelDifference (dB) Description: Log10 of magnitude of voltage ratio in dB |
| arg_y |
Default Value: bode.arg_y Type: Angle (rad) Description: Angle of voltage ratio |
Components (9)
 |
frequencySweep |
Type: LogFrequencySweep |
|---|---|---|
 |
voltageSource |
Type: VariableVoltageSource |
 |
ground |
Type: Ground |
 |
resistor |
Type: Resistor |
 |
inductor |
Type: Inductor |
 |
complexConst |
Type: ComplexConstant |
 |
currentSensor |
Type: CurrentSensor |
 |
voltageSensor |
Type: VoltageSensor |
 |
bode |
Type: Bode |