WOLFRAM SYSTEM MODELER
dp_twoPhaseGeodetic_DPGeodetic pressure loss of straight pipe for two phase flow | calculate pressure loss |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Fluid.Dissipation.Utilities.Functions.PressureLoss.TwoPhase.dp_twoPhaseGeodetic_DP"]
Out[1]:=
Syntax
DP_geo = dp_twoPhaseGeodetic_DP(voidFractionApproach, crossSectionalAveraged, length, phi, rho_g, rho_l, x_flow)
Inputs (7)
| voidFractionApproach |
Default Value: Dissipation.Utilities.Types.VoidFractionApproach.Homogeneous Type: VoidFractionApproach Description: Choice of void fraction approach |
|---|---|
| crossSectionalAveraged |
Default Value: true Type: Boolean Description: = true, if cross sectional averaged void fraction, otherwise volumetric |
| length |
Default Value: 1 Type: Length (m) Description: Length in fluid flow direction |
| phi |
Default Value: 0 Type: Angle (rad) Description: Tilt angle to horizontal |
| rho_g |
Type: Density (kg/m³) Description: Density of gaseous phase |
| rho_l |
Type: Density (kg/m³) Description: Density of liquid phase |
| x_flow |
Default Value: 0 Type: Real Description: Mass flow rate quality |
Outputs (1)
| DP_geo |
Type: Pressure (Pa) Description: Geodetic pressure loss |
|---|