WOLFRAM SYSTEMMODELER

BaseClasses

Base classes used in the Vessels package (only of interest to build new component models)

Package Contents

PartialLumpedVessel

Lumped volume with a vector of fluid ports and replaceable heat transfer model

HeatTransfer

HeatTransfer models for vessels

VesselPortsData

Data to describe inlet/outlet ports at vessels: diameter -- Inner (hydraulic) diameter of inlet/outlet port height -- Height over the bottom of the vessel zeta_out -- Hydraulic resistance out of vessel, default 0.5 for small diameter mounted flush with the wall zeta_in -- Hydraulic resistance into vessel, default 1.04 for small diameter mounted flush with the wall

VesselFluidPorts_a

Fluid connector with filled, large icon to be used for horizontally aligned vectors of FluidPorts (vector dimensions must be added after dragging)

VesselFluidPorts_b

Fluid connector with outlined, large icon to be used for horizontally aligned vectors of FluidPorts (vector dimensions must be added after dragging)

Wolfram Language

In[1]:=
SystemModel["Modelica.Fluid.Vessels.BaseClasses"]
Out[1]:=